C series CO2 laser tube has high optical quality, strong cutting force and high stable performance. At the same time, advanced vacuum coating technology is used to further improve the power and service life of the laser tube, and provide a stable laser source for demanding laser machinery manufacturers.

Connection Method

STEP 1

Carefully take the laser tube out of the outer packing box and place it on the holder of the machine. Note that the positions of the supporting points at both ends should be aligned with the base.

Face the label of the laser tube up and fix the laser tube to the base of the bracket with a fixing strap.

Connect the inlet and outlet hoses of the chiller to the two ends of the laser tube respectively. The water outlet of the chiller connects to the water inlet of the laser tube. The water inlet of the chiller connects to the water outlet of the laser tube.

STEP 2
Connect the laser tube to the power supply (Please make sure the device is not powered):

Connect the high-voltage line of the laser tube to the high-voltage line of the laser power supply.

Wrap the interface with insulating tape and insert it into the pipe of the quick connector.

Finally, lock the quick connector, and sort out and fix the high-voltage wires on the laser tube or equipment.

Connect the negative wire of the laser tube to the negative wire of the laser power supply, and wrap the interface with insulating tape.

Sort out and fix the high-voltage wires on the laser tube or equipment.